PDA

View Full Version : Moon lighting



jdrabek
25.01.2010, 01:32
Can someone help me set up my moonlighting? I am wanting to use my LED fixture I built that is dimmable for this purpose.

I have read the manual but still cant get it to work.

So far I have tried the following:
Set illumination channel 6 to run from 10pm to 5am and checked the moonlight box.
Under simulation for moonlighting I set the time for 10pm to 5am.
Saved and loaded the settings.
Set illumination channel 6 as dimmable and set the intensities and duration.
Set illumination channel 6 as a 1-10v device.

No matter what I have tried I still can not get the moonlights to come on.

This LED fixture is used during the day as well. For the daytime I have made it illumination channel 5. It is working fine. It dims up and down how I want it. Like I said I just can not get the moonlighting to work.

If all else fails I will just extend the LED lighting during the day to cover the night/morning and dim it accordingly. This will work, but I wanted to get the affect of the moon cycle.

jdrabek
26.01.2010, 04:40
I can see in under the light mixer that illumination channel 6 is active and just over 50% output, but the LED's are not coming on.

Any ideas?

jdrabek
27.01.2010, 23:35
Anyone?

Is this not possible with anything else, but the GHL led lights?

aqua_digital
28.01.2010, 00:26
have you set the 1-10V interface it is plugged into to Illumination 6?

jdrabek
28.01.2010, 01:39
Yes.

I think I just realized what my problem is. I will post if it does not work.